For a complete listing of
hoses, filters, and other general
accessories click
here.
We carry other Walcom
parts and accessories, if you need something
that isn't listed
e-mail
or
call us.
GEO 92 & 97 FX FZ
SERIES
Closeout - While Supplies Last - I
have the following Geo sets at 50% off list
(240.00) - $120.00
#W3807 - 0.7mm - Needle,
Nozzle Aircap set - 1 to sell
#W3817 - 1.7mm - Needle, Nozzle Aircap set -
1 to sell
#W3819 - 1.9mm - Needle, Nozzle Aircap set -
2 to sell
#W1013 Rebuild Kit -
29.00
#W4519 Suction Cup Gaskets - 4.15 (set
of 5)
#W4518 Replacement Suction Cup Assembly -
74.50
#W1388 Replacement Gravity cup
(aluminum 750cc) - 49.00
#52007/W Replacement Gravity Cup (aluminum
500cc) - 49.00
HVLP SYSTEM
Needle/nozzle/air cap kits
(state size) - 196.00
#W3960 - 1.0mm
#W3962 - 1.2mm
#W3964 - 1.4mm
#W3967 - 1.7mm
#W3969 - 1.9mm
#W3975 - 2.5mm (for FX only)
#W1013 Rebuild Kit -
29.00
#W1388 Replacement Gravity cup
(aluminum 750cc) - 49.00
#52007/W Replacement Gravity Cup (aluminum
500cc) - 49.00
SLIM HVLP
SERIES
Needle/nozzle/air cap kits (state size) -
96.95
#W3930 - 1.0mm
#W3933 - 1.3mm
#W3935 - 1.5mm
#W3937 - 1.7mm
#W3939 - 1.9mm
#W3942 - 2.2mm
#40761 Rebuild Kit - 17.00
#W1388 Replacement Gravity cup
(aluminum 750cc) - 49.00
#52007/W Replacement Gravity Cup
(aluminum 500cc) - 49.00
#W1881 Replacement Nylon cup 680cc -
49.00
STM HVLP
Needle/nozzle/air cap kits
(state size) - 92.00
#W1354 - 0.7mm
#1011263 - Rebuild Kit -
15.00
#W1395 - Replacement 75cc gravity cup -
36.00
9000 HVLP SERIES
9010 HVLP and
9010 SP
Needle/nozzle/air cap kits
(state size) - 80.00
#A43110 - 1.0mm (only
for "SP" model)
#A43117 - 1.7mm
OM HVLP
Needle/nozzle/air cap kits
(state size) - 50.00
#A40114 - 1.4mm
#A40730 - Rebuild Kit -
15.00
ES/RV
Needle/nozzle/air cap kits
(state size)
#40350 - 0.3mm - 47.75
#40351 - 0.5mm - 36.50
#40352 - 0.7mm - 36.50
#40353 - 1.0mm - 36.50
#40715 - Rebuild Kit -
15.00
#52030 - Replacement 250cc
nylon gravity cup - 37.80
#52036 - Replacement 125cc aluminum gravity
cup - 28.35
MAINTENANCE &
ACCESSORIES
#91000 - Walcom GEO Series
Tool Set - These tools are required for
removal and replacement of certain parts in
the GEO/HVLP guns. Sold as a set only.
145.00
#90134 - Walcom GEO/HVLP
Series Spare Parts Box - This
box contains all the major spare parts you
should need for all GEO, HA and HVLP series
guns.
284.00
60130 - Walcom
Gun Supporter - This
supporter will attach to a metal booth wall
with the included magnet, or you can use
screws. Very sturdy construction and
supports 2 gravity guns and have a built in
holder for strainers.
76.00
W1423 - Walcom Cleaning Kit - This
kit contains the micro-needles necessary for
proper air cap maintenance of all Walcom
Guns. - 39.15
3 - wooden needles
1 - large cleaning brush
1 - micro-cleaning brush
12 - metal needles for air cap atomizing
holes
#90114/W - 140 mesh Nylon
filter for gravity guns (pkg/10) -
35.00
#90137/W - 60 mesh for paints and
primers (pkg/10) - 35.00
#W1425 - 215 mesh Stainless Steel Filter for
suction guns - 7.00 ea.
The list below is what we
have left of older parts and not so common
parts for Walcom and Asturomec
