Home Articles Contact Us Our Dealers Dye FAQ's Forum Information
Links MSDS Search Site Map Technical

 

 

PRODUCT AISLES

PRICING & ORDERING INFO 
________

ABRASIVES
-------------------

BOOKS & VIDEOS
-------------------

BRUSHES
-------------------

CLOSEOUTS
-------------------

CONTAINERS
-------------------

FINISHES
-------------------

HVLP SPRAY EQUIPMENT
-------------------

PASTE WOOD FILLERS & GLAZES

-------------------

POLISHING & RUBBING OUT
-------------------

STAINS & COLORANTS
-------------------

SAFETY PRODUCTS
-------------------

TOUCH UP
HIDE GLUE SOLVENTS MISC.

-------------------

USED, B, & CLOSEOUT SPRAY EQUIPMENT
-------------------
 

 




  Walcom PartsPressure Pots


 

ASTUROMEC HVLP Spray Guns 

 

Walcom spray guns are manufactured in Italy to the most exacting standards for professional woodworkers and automobile finishers. They are  distributed in the USA by Walcom USA.  All warranties, parts and service are handled here in the United States.

 

 

SLIM SP HTE

Body: chemically nickeled and polished aluminum
Nozzle: 303 stainless steel
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: sealed lubricating Teflon
Use: through pressurized containers or pumps
Working Pressure: 36-43 psi
Air Consumption: 8 cfm
Needle/nozzle/air caps: 1.0, 1.3, 1.5, 1.7, 1.9mm
                              PRICE: $209.00

 

 

Suggested Nozzles for SLIM HVLP & HTE Systems

Finish Type SLIM S SLIM SP
Water-base 1.5 - 1.7 1.0-1.3
Solvent Lacquer 1.3 - 1.5 1.0-1.3
Conversion Lacquer 1.7 - 1.9 1.5
Oil Varnishes 1.7 - 1.9 1.5
Paint 1.9 - 2.2 1.5 - 1.7

 

ES/RV SERIES

The ES/RV is a very affordable spray gun that's found favor with a lot of luthiers. Great for toning, shading, and spraying thin to medium clears. Metal cup and all stainless steel wet parts are used and guns have fan width and fluid control.

 

ES/RV

Body: nickel-plated brass with plastic grip cover
Finish passages
: stainless steel, nickel-plated
Needle/nozzle/springs: stainless steel
Air cap: OT 58 brass
Gravity Cup: Aluminum 125cc

 

Working Pressure: 28-35 psi
Air Consumption: 1-2 cfm
Needle/nozzle/air caps: 0.3*, 0.5, 0.7, 1.0mm
PRICE: $121.00
 

 

 

 

* 0.3mm is an internal mix nozzle for air-brush type touch up and detailing.

 

 

  BACK TO TOP

 Copyright ©2012 Homestead Finishing Products. All rights reserved.