CA
Tech L300H/QS-32 1 to sell -
includes gun with 1.0mm nozzle
setup and 1 quart attached cup. Only 1 to sell at this price! Ported
air nipple pressurizes cup automatically as you spray!
PRICE:
$370.00
CA
Tech CSLP/QualSpray QS-64S 2 quart P/Pot 1 to sell -
includes gun, pressure pot,
dual regulators and 15' twin poly hose. An absolute steal at this price! Pot
has no Teflon inner coating.
#QS64S/CSLP -
$550.00
(Regular $652.00)
Walcom SSP5 2.4
gallon All-Stainless P/Pot and Walcom FZ/SP Genesi HVLP Spray Gun -
1 to sell -
includes gun, pressure pot,
dual regulators and 15' twin poly hose. An absolute steal if you want to
spray waterbornes. Feature non-rusting stainless steel pressure tank and
special waterborne air cap.
#SSP5/FZSP -
$799.00
(Regular $1038.00)
This
Walcom 2 Liter Pressure Pot
is simple, versatile, and eliminates the screw
top that is typically found on similar pots. Very lightweight, it can be
held in your free hand or over your shoulder with the included shoulder
strap. The best combo we've found is with the very lightweight SLIM HTE gun.
#90014/SLIM - SSP2 2 liter pressure pot with
SLIM HTE gun - PRICE:
$599.00 (Regular 699.00)
1 left to sell!
QualSpray AM-6008 Demo Gun/QS85SS P/Pot
What a great deal for all stainless!!! Includes all original packaging and manuals. Great for
use with waterbornes and includes 3 nozzle sets for spraying everything! All
Stainless Pressure Pot!
10 ft hoses. Warranty 1 year .
Your price
$599.00
more info
19 PRESSURE FEED
Gun Body: Teflon coated aluminum
Passages/nozzle/needle: stainless steel
Air cap: Anodized aluminum
Cup: From pressurized pots
Working Pressure: 40-45 psi
Air Consumption: 8.5-10 cfm
Standard setup includes .043 needle nozzle with #7
aluminum air cap
#19 Gun only
$350.00
#19-QS32xya - 19 Gun, 1 Qt Cup
$389.00
1 left to sell!
19i PRESSURE FEED
The 19i moves the fluid inlet down and back towards the air
inlet. This keeps the fluid hose back away from the piece so you don't risk
marring the wet finish. What a great idea!
Gun Body: Teflon coated aluminum
Passages/nozzle/needle: stainless steel
Air cap: Anodized aluminum
Cup: From pressurized pots
Working Pressure: 40-45 psi
Air Consumption: 8.5-10 cfm
Standard Package includes .043 needle nozzle with #7
aluminum air cap. Other setups available, just ask!
#19i Gun $375.00
1 left to sell!
USED PRODUCTS
Martech
Model 50-2 filters air from your compressor and is designed to support two supplied
air respirators at the same time. This affordable panel system is outfitted with a
solid-state monitor and four-stage filtration. Built in warning lamps and
audible horn to alert users if hazardous gases exceed the preset OSHA
levels. Good system for stripping and spray painting operations. Includes
1 full face mask & safety shield
as shown. Brand new filters installed and stage 2, 3 and 4
extra filters included. $2115.00 new.
Price - $950.00
Modular storage system for a full size cargo van. Exactly as shown except
mine has a door for the storage area beneath the top bins. Two large drawers
on the left and 4 smaller drawers on the right. Approximately 39" W x 44"H x
13-1/2D. Weighs about 150 pounds. Very sturdy construction. Over 400.00 new.
Pickup at our location only
Price - $150.00
JET DC-1100 DUST COLLECTOR
- 1-1.2 hp, single phase. Approximately 3 years old.
Pickup at our location only
For more information on
this product visit the Jet website
here.
Price - $200.00
QualSpray
QS-64S -
Used during the Spray Finishing Made Simple Video. Same as the a new one except
no Teflon on the pot inside and 25%
less. Includes all original packaging and manuals. Warranty 1 year .
Your price
$110.00 (single regulator, add 20.00 for double
regulator)
BACK
TO TOP
Copyright © 2010
Homestead Finishing Products All rights reserved.
