|
 F-3
This disposable in-line filter removes
oil, water, rust, dirt and other particles that get through other downstream
filters. It's designed for low restriction of air so you can install it
right at the gun and won't affect low pressure guns like LVLP and HVLP. A
very economical way to remove the last trace of contaminants before they
enter the gun.
#F3 - PRICE: $3.75
(each)
QS-F1 This
transparent
In-line Filter removes air line water before it can get into your gun
or pressure tank. Easily mounts right at the tool air inlet to provide the
best protection. Water is purged by depressing a small plunger and the
filter can be taken apart and cleaned if necessary. Item is bi-directional.
#QS-F1 - PRICE: $20.00
 QS-D1 When
you need to remove all traces of water vapor and oil, this
economical in-line desiccant works just like the expensive wall mount units.
Uses silica to remove every trace of oil and water and changes from blue to
pink when it needs to be changed. Item comes with 1 extra silica change and
has 1/4" female and male connections. Item works best when a water extractor
is installed before unit to remove liquid water in line. Unit is bi-directional.
#QS-D1 - PRICE: $18.00
QS-815 This
Gravity Gun Holder and filling station holds both full size (right)
and smaller detail gravity guns like the QS200 with the smaller gun
support (included). The top ring holds strainers for easy filling and will
swing out of the way once the cup is filled. Comes complete with screws for
attaching to a wall or your bench. Molded plastic construction.
#QS-815 - PRICE:
$17.95
QS-814
The Master Maintenance Kit is designed to
provide you with the necessary specialized tools to clean every area of your
HVLP and LVLP* spray gun or pressure pot system. An absolute must for maintaining your gun
properly. This system is the one used by professional repair and rebuilding
shops.
Includes:
Brass pick up tube brush
12" pick up tube brush
6 pc. micro needle set with handle
3 pc. detail end bush with handle
5 pc. twisted mini brush set
Large nylon brush for general parts cleaning
1/4" and 1/2" brushes for cleaning body cavities and air passages
Gun lube
Items are packed in a convenient flip-top plastic case.
#QS-814 - PRICE:
$45.00
* Unit has micro-needles for cleaning small annular
holes in LVLP guns.
 QS-820
The HVLP Cleaning and Servicing Kit has the basic brushes and micro brushes
for general gun maintenance and servicing. Good for gravity, touch-up and siphon guns.
19 pc. kit comes in a clear plastic tube for easy storage. The best
choice for Accuspray guns!
Includes:
A - 1/2" twisted bristle brush
B - O-ring removal tool
C - Gun Lube
D - 12" pick up tube cleaning brush
E - 1/4" twisted bristle brush
F -
6 pc. precision needle set
G -
5 pc. miniature brush set
H - Nylon bristle parts brush
I - Detail End Brush
#QS-820 - PRICE:
$29.95
 #QS813
The Basic Cleaning Kit has the basic brushes and micro brushes
for general gun maintenance. Good for gravity, touch-up and siphon guns.
17 pc. kit comes in a blister pack.
This kit has the basic brushes
for general gun maintenance. Good for gravity, touch up and siphon guns.
Includes:
12" pick up tube cleaning brush
1/4" twisted bristle brush
1/2" twisted bristle brush
Detail end brush
Nylon bristle parts brush
5 pc. miniature brush set
6 pc. precision needle set
#QS-813 - PRICE:
$24.95
 #BQ-M05
The 5 piece mini-brush set in all the Cleaning Kits above gets
the most use. Customers asked for replacements so here they are - 5
replacement mini-brushes on a ring.
#BQ-MO5 - PRICE:
$5.00
BACK TO TOP
Copyright © 2011 Homestead Finishing Products All
rights reserved. |
