|
 This North American Manufacturer of HVLP
Systems based on turbine technology has been setting the standard for
turbines since 1986. Fuji offers the quietest turbine on the market and in
our opinion is the best one on the market, beating out all the others
including Accuspray in noise level.
We feel Fuji delivers the best equipment
at a price that's much less than industrial turbine equipment, and it has
the best warranty in the business (2 years). Absolutely the best way to go
for homeowners, serious hobbyists, woodworking enthusiasts, and small shops.
All turbine systems come with the new XPC
(Introduced Dec 2009) Spray Gun. Here's a quick look at the main features.
Please feel free to call us at 866-631-5429 with any Fuji questions.
Fuji - 9600-XPC Spray Gun
Fuji has
incorporated some new features on their XPC Spray Gun introduced in December
2009. It now has a variable width fan pattern adjustment knob. Earlier
models required turning the aircap and re-positioning the retaining ring to
adjust the pattern and it sometimes proved difficult to achieve certain
patterns. The XPC gun also features stainless steel pickup tubes and a
cam-lock cup system which makes opening and closing the cup easy.
|
 Special!!
- upgrade any
Fuji Turbine to a 2 quart
remote
cup system with our 2 qt pressure pot and mini-compressor kit.
Includes compressor, 2 qt QualSpray remote pot, 6 ft fluid hose and
25 ft air hose to hook from compressor to pot. Compressor features
auto-shutoff and water filter/drain.
#QS-64S/SC110 -
$299.00
|
FUJI SEMI-PRO 2 STAGE TURBINE SYSTEMS
Semi-PRO 2 System
-
To meet the growing demand of the DIY market, Fuji Spray has introduced the
most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 HVLP
Spray System offers features like no other in its price range.
Package includes The Turbine, M-Model
Spraygun with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User
Manual, Viscosity Cup, Wrench, Cleaning Brush.
Turbine:
2
stages
Weight: 25.2 lb
Gun:
Series M, non-bleeder
Air cap: 1.3mm
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): stainless steel 1.3mmmozzle/needle with matching aircap.
0.8mm, 1.0mm, 1.3mm, 1.5mm, 1.8mm & 2.0mm available.
#2202 -
$439.00
- (with 1000cc siphon style pressurized cup)
When comparing this to other similar priced models know
that the Fuji uses a 2 stage 1400 watt motor putting out 105 cfm at 5 psi.
FUJI 3 & 4 STAGE TURBINE SYSTEMS
The
Mini-Mite 3 and Mini-Mite 4 stage units are the entry-level units from Fuji.
These systems use the same turbines used by other manufacturers and at about
the same noise level but not as quiet as the Fuji Super and Q Series. If you
can take a bit of noise these systems will save you money and frustration
that you'll have with low-priced entry level models from other
manufacturers. Great instructions and you'll get the type of personal
service you expect from Homestead.
Mini-Mite
3 Series -
Portable and
lightweight, this unit is great for stains, sealers, lacquers, varnishes and
urethanes and produces about 6 psi. This system way out-performs similar
consumer oriented systems. Latex finishing can be done on smaller areas and furniture (not
for walls and large areas). Package includes
Turbine, XPC Spray Gun
with Cup, 25' Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
3
stages
Weight: 26.5 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): System includes standard #4 1.4mm
nozzle/needle with matching aircap
#2903-XPC -
$565.00
- (with 1000cc siphon style pressurized cup)
The Mini-Mite 3 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2803-G-XPC -
$565.00
- (with 400cc gravity style pressurized cup)
Mini-Mite
4 Series -
Step up to 4 stage power which produces
approximately 8 psi. Same turbine used
in other manufacturers' 4 stage units, this little guy packs a punch. Better
for latex finishing and some of the heavier bodied waterbornes. Package includes
Turbine, XPC Spray Gun
with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
4
stages
Weight: 27.5 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): system includes standard #4 1.4mm
nozzle/needle with matching aircap
#2904-XPC -
$699.00
- (with 1000cc siphon style pressurized cup)
The Mini-Mite 4 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2804-G-XPC -
$699.00
- (with 400cc gravity style pressurized cup)
Super 3 Series -
Utilizing better noise reduction, the Super
Series comes in both 3 and 4 stage and the gravity gun can be substituted at
no extra charge. A great way to get a quieter unit without a hefty price
increase over the Mini-Mite Series. Package includes
Turbine, XPC Spray Gun
with Cup, 25ft Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
3
stages
Weight: 36 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): System includes standard #4 1.4mm
nozzle/needle with matching aircap
#2908-XPC -
$689.00
- (with 1000cc siphon style pressurized cup)
The Super 3 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2808-G-XPC -
$689.00
- (with 400cc gravity style pressurized cup)
Super 4 Series -
Stepping up to 4 stage power gives you better
results with thick coatings like paint and faster delivery speeds. Package
includes
Turbine, XPC Spray Gun
with Cup, 25' Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
4
stages
Weight: 37 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): system includes standard #4 1.4mm
nozzle/needle with matching aircap
#2909-XPC -
$820.00
- (with 1000cc siphon style pressurized cup)
The Super 3 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2809-G-XPC -
$820.00
- (with 400cc gravity style pressurized cup)
Q3 Gold Series -
This is Fuji's quietest model and the extra
noise reduction system used on this model is patented. The best 3 stage
turbine for the money anywhere. Package includes
Turbine, XPC Spray Gun
with Cup, 25 ft Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
3
stages
Weight: 39 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): System includes standard #4 1.4mm
nozzle/needle with matching aircap
#3003-XPC -
$815.00
- (with 1000cc siphon style pressurized cup)
The Super 3 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2893-G-XPC -
$815.00
- (with 400cc gravity style pressurized cup)
Q4 Gold Series -
Stepping up to 4 stage power gives better
results with thick coatings like paint and faster delivery speeds. The Q4 is Fujis' best and baddest! Package includes
Turbine, XPC Spray Gun
with Cup, 25' Hose with Quick-Connect, Air Control Valve, User Manual,
Viscosity Cup, Wrench & Cleaning Brush.
 Turbine:
4
stages
Weight: 40 lb
Gun:
Series 9600-4 XPC, non-bleeder,
stainless steel passages
Air cap: Aluminum #4
Cup: pressurized 1000cc aluminum
Needle/nozzle/air cap (mm): System includes standard #4 1.4mm
nozzle/needle with matching aircap
#3004-XPC -
$949.00
- (with 1000cc siphon style pressurized cup)
The Super 3 system is available with a 400cc gravity gun option instead
of the standard 1000cc siphon cup. This gun is typically used by auto-touch
up and detailing, bathtub refinishers and other applications where a smaller
cup is desired. The gravity cup is also better is you routinely spray small
amounts of finish
#2894-G-XPC -
$949.00
- (with 400cc gravity style pressurized cup)
FUJI SPRAY GUNS
We
recommend the #3 set for sealers and some clear finishes like thinned
lacquer and waterbornes. If you plan on spraying paints, purchase the #5 or #6 (we'll help you
select which one).
9600-XPC Spray Gun -
This spray gun will operate with any turbine
system. Lightweight and ergonomic, but packed with great features. This is a
really good gun for waterbornes due to its all stainless finish travel path
(some other turbine guns do not have a stainless pickup tube). Add on the
variable fan width control and you've got a winner.
Gun Body:
Aluminum with plastic covering on handle, non-bleeder
Passages/nozzle/needle: stainless steel
Air cap: Anodized Aluminum
Cup: Pressurized, to attach to
turbine*
Standard Setup is 1.4mm NN set (#4)
#9600-XPC -
$309.00
- (with 1000cc siphon style pressurized cup)
Special!
Increase the versatility of your Fuji suction
gun with the Fuji
9600-XPC and the 3M PPS cup system. Choose from the 8 oz mini-cup or the
large cup (30 oz shown right) You also get the standard 1 quart aluminum
cup. PPS allows you to use the cup in any position, even upside down to get
into those hard to reach areas!
#9600-XPC/PPSMINI -
$385.00
- (with 6 oz suction style pressurized cup, PPS mini H/O cup #16121, #34
adapter and 10 16114 mini lids/liners)
#9600-XPC/PPSLARGE -
$425.00
- (with 1 qt suction style pressurized cup, PPS large H/O cup #16124, #18
adapter and 10 16124 large lids/liners)
9600-G-XPC Gravity Spray Gun -
This spray gun is a great addition to your
Fuji system or any turbine system. Lightweight and ergonomic, it's
pressurized like the siphon style cup but it's smaller size makes it great
for small jobs, or where you need detail and precision. Best gun when you
only want to spray small amounts (like 1 oz.) of finish and all the finish
will spray through the cup. A very nice feature of this gun is the cup
swivels to different positions to make it more maneuverable! If you need a
larger cup, use the 3M PPS medium (20 oz) or PPS large (30 oz) cups. Go
here for
more details on 3M PPS (use the PPS adapter #24).
Gun Body:
Aluminum with plastic covering on handle, non-bleeder
Passages/nozzle/needle: stainless steel
Air cap: Anodized Aluminum
Cup: Pressurized 400cc to attach to
turbine*
Standard Setup is 1.4mm NN set (#4)
#9600-G-XPC -
$309.00
- (with 400cc gravity style pressurized cup)
Special!
Increase the versatility of your Fuji gravity
gun. Get the Fuji 9600-G-XPC and the 3M PPS cup system. Choose from the 8 oz
mini-cup (shown right) or the large cup (30 oz) You also get the standard
400cc (13 oz) aluminum cup. PPS allows you to use the cup in any position,
even upside down to get into those hard to reach areas!
#9600-G-XPC/PPSMINI -
$385.00
- (with 400cc gravity style pressurized cup, PPS mini H/O cup #16121, #24
adapter and 10 16114 mini lids/liners)
#9600-G-XPC/PPSLARGE -
$425.00
- (with 400cc gravity style pressurized cup, PPS large H/O cup #16124, #24
adapter and 10 16124 large lids/liners)
Already have the Fuji Gravity or Siphon Gun? Then just add one of the
packs below to convert to either the PPS Mini or Large Cup
 #H/O-PKG -
$159.00
- includes 1 cup and collar, 25 lids and liners and #18 (suction) or #24
(for gravity) adapter
#H/O-MINI-PKG -
$149.00
- includes H/O mini cup and collar, 50 lids and liners and #34 (suction) or
#24 (gravity) adapter.
FUJI PARTS
Below
listings are
the most common parts. While all systems come with everything you need to
get started, we recommend that you buy the 6' whip flex hose when
purchasing a complete turbine/gun system. This alleviates hand fatigue that you get with the
stiffer main hose. Also consider an extra nozzle set if you are planning
on spraying more than just typical clear finishes. We recommend the
#3 set for sealers and some clear finishes like thinned lacquer and
waterbornes. If you are spraying paints, buy the #5 or #6 (we'll help you
select which one).
 |
#2049F - 6' flex whip hose |
$30.95 |
 |
#7049 - 25' turbine hose with air
control and quick disconnect |
$62.00 |
 |
#2032 - air control valve (with quick
disconnect) |
$5.00 |
 |
#2046 - quick disconnect |
$5.00 |
 |
#3050 - Viscosity cup. Ford #4. Same
viscosity cup that comes with all Fuji systems. |
$5.20 |
 |
#8050-2 - #2 nozzle set (0.7mm/.028")
FOR XPC SPRAY GUNS ONLY
For very thin stains, paints and clear finishes where
precision is needed |
$56.40 |
 |
#8050-3 - #3 nozzle set (1.0mm/.039")
FOR XPC SPRAY GUNS ONLY
For thin stains, sealers and clear finishes |
$56.40 |
 |
#8050-4 - #4 nozzle set (1.4mm/.055")
FOR XPC SPRAY GUNS ONLY
The standard setup that comes with each turbine system.
For general purpose spraying of clear finishes and some thinned
paints |
$56.40 |
 |
#8050-5 - #5 nozzle set (1.8mm/.070")
FOR XPC SPRAY GUNS ONLY
For thick paints and latexes. Allows faster delivery of
paint over #4 setup |
$56.40 |
 |
#8050-6 - #6 nozzle set (2.2mm/.086")
FOR XPC SPRAY GUNS ONLY
For very thick paints, primers. plaster and some
specialty products. |
$56.40 |
 |
#2024-5 - Check valve with tubing.
Pack of 5. The most common problem with a turbine gun is a clogged
check valve. |
$15.15 |
|
|
#2024-5L - Longer Check valve with
tubing for gravity guns. Pack of 5. |
$15.15 |
 |
#2038 - Plastic diaphragms (splash
guards). These slip over the pickup tube inside the cup and keep
finish from getting into the check valve |
$10.15 |
 |
#2036-5 - Cup gaskets. These need to
be periodically replaced to insure a tight seal on the cup. Packs of
5 |
$15.35 |
 |
#2039 - Cup parts kit. 3 each of the
main wearable parts for the cup.
FOR NEW CUPS ONLY, NOT FOR OLDER
CUPS WITH THE BLACK LID |
$21.80 |
 |
#9050-5 - Gaskets for gravity cups.
Pack of 5 |
$15.40 |
 |
#2030 - Gravity cup parts kit.
Includes 5 gaskets and 5 check valves |
$27.80 |
 |
#9044 - Nylon strainers for use
inside bottom feed cups. Pkg of 2. Don't use with thick paints like
latex. |
$2.10 |
 |
#9080 - Mini Cup Set. Includes 1 8 oz
cup with lid and check valve, plus 2 8 oz cups with tops. Great for
small projects and when you have to switch colors or types of
finishes. Good for turners, luthiers, touch up and repair.
|
$43.85 |
 |
#9903-3 - Caps for bottom feed cups.
Makes storing finish easy. |
$3.05 |
 |
#4009 - Mini-Mite turbine filters,
Pack of 2 |
$6.15 |
 |
#1044 - Super Gold Series. 1 filter.
NOT FOR OLDER S SERIES |
$6.10 |
 |
#5029 - Q Series Turbine Filter. 1
Filter. Fits all current Q Gold and Pro Models |
$6.10 |
BACK TO TOP
Copyright © 2012 Homestead Finishing Products.
All rights reserved. |
