Home Articles Contact Us Our Dealers Dye FAQ's Archived Forum Forum Information
Links MSDS Search Site Map Technical

 

 

 

 

PRODUCT AISLES

PRICING & ORDERING INFO 
________

ABRASIVES
-------------------

BOOKS & VIDEOS
-------------------

BRUSHES
-------------------

CLOSEOUTS
-------------------

CONTAINERS
-------------------

FINISHES
-------------------

HVLP SPRAY EQUIPMENT
-------------------

PASTE WOOD FILLERS & GLAZES

-------------------

POLISHING & RUBBING OUT
-------------------

STAINS & COLORANTS
-------------------

SAFETY PRODUCTS
-------------------

TOUCH UP
HIDE GLUE SOLVENTS MISC.

-------------------

USED, B, & CLOSEOUT SPRAY EQUIPMENT
-------------------
 

 

 


 

 

ASTUROMEC HVLP Spray Guns

 

This Colorado based company  features a wide selection of pots and the exclusive Bandit design is one of the best 2 quart pressure pots we've used - period. You'll find a pressure pot to suit both your budget and application. Their Jaguar and Lynx guns are very well designed and feature exclusives not found on other guns. 

 

 

 

 

 

 HVLP SPRAY GUNS

CAT HVLP SLP Spray Guns

The Jaguar JSLP HVLP (gravity feed) and SLP (pressure feed) Spray Guns improve on previous designs  with the 12 point balance plenum design, ensuring a finely atomized finish. This is undoubtedly one of the best HVLP guns you can get and breaks up any finish with it's smoke-like atomization. Great for both automotive and wood finishing. Excels at breaking up NGR stains. Only 29 psi inlet pressure required. Made in the USA and has a lifetime warranty.

 

JSLP Gravity Gun

 

Body: forged anodized aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: 2 - anodized aluminum
Gaskets
: self lubricating Teflon
Cup: polished aluminum with rotating vent hole 750cc (26 oz)
Working pressure: 29 psi.
Air Consumption: 13.5 cfm
Needle/nozzle/air caps: 1.0, 1.3, 1.9.

 

 

 

 

 

Comes in a hard case with gun holder, regulator, service tools, filters 3 NN setups (1.0, 1.3 & 1.9mm), 2 aircaps and mini-regulator.

#CP-JSLP-W  PRICE: $430.00

   LIFETIME WARRANTY! 

#51-401 - Spare 750cc Cup PRICE: $35.00
#PPS-MEDSTART - 3M PPS starter kit for JSLP includes 1 medium cup and collar, 10 lids/liners, PPS adapter - PRICE: $55.00

 

 

CSLP Pressure Feed Gun

 

Body: forged aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets
: self lubricating Teflon
Working pressure: 29 psi.
Air Consumption: 13.5 cfm
Needle/nozzle/air caps avaialable: 0.8, 1.0, 1.3, 1.4, 1.5, 1.7, 1.9, 2.2.

#CP-CSLP  PRICE: $395.00 (Cat-PACK CSLP - includes 0.8mm, 1.3mm & 1.7mm NN sets)

   LIFETIME WARRANTY! 

 

 

 

 

CP-CSLP-303R2 - CSLP Gun, 1 qt regulated attached cup 0.8*/1.3/1.7mm sets
PRICE: $500.00

* Substitute 1.0mm for 0.8mm

Comes with hard case, 2 air caps, service and cleaning tools and the 3 NN sets (below)

 

 

 

LYNX Pressure Feed Spray Gun

The Lynx Spray Gun is a pressure feed gun, and like the Jaguar, it features solid, dependable construction and is made in the USA. It's available two ways. Team it up with a remote pressure pot from C.A. Technologies (gun body shown below), or just buy it with the 1 quart pressure cup attached.

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: self lubricating Teflon
Cup: from remote pressure pot
Working pressure: 17 (L100H) or 40 (L300H) psi.
Air Consumption: (L300H) 13 cfm
Air Consumption: (L100H) 6 cfm (with 1090 air cap)
Needle/nozzle/air caps available
:
(L100H) 0.8, 1.0, 1.2, 1.3, 1,5, 1.6, 1.7
(L300H) 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.7, 1.9, 2.2

 

 

At right, the Lynx 100H (CP-L100H-303R2) can be configured with an attached 1 quart pressurized cup. Makes spraying easy without a remote pressure pot and hoses. Converts easily to remote feed. If you like pressure cup spraying without attached regulators, this unit is the best. The package deal comes with 3 nozzle setups, 2 aircaps and servicing/cleaning tools.

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: self lubricating Teflon
Cup: 1 qt polished aluminum pressure pot
Working pressure: 13 psi.
Air Consumption: (1090* Air Cap) 6 cfm
Needle/nozzle/air caps
: 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.6, 1.7

 

 

ITEM PART#

 

APPLICATION

 

DESCRIPTION

NEEDLE/NOZZLE/AIR CAP  

PRICE

   

 

   
#CP-L100H All woodworking stains and clears Lynx L100H Lo-cfm gun, no cup in hard case 1.0, 1.3 & 1.7.mm with #1090 and 1094  Alum Aircap  

$415.00

#CP-L100H-303R2 All woodworking stains and clears Lynx L100H Lo-cfm gun, 1 qt cup cup in hard case 1.0, 1.3 & 1.7.mm with #1090 and 1094  Alum Aircap  

$510.00

#CP-L100H W/PPS All woodworking stains, clears & paint Lynx L100H Lo-cfm gun, PPS Large H/O cup, 10 lids/liners, PPS adapter & regulator in hard case 1.0, 1.3 & 1.7.mm with #1090 and 1094  Alum Aircap  

$580.00

 

Jaguar Gravity Feed Spray Gun

The Jaguar J100H is a much lower cfm gun if you have a smaller compressor. Features the same great atomization as the JSLP, but with less compressor. Only 6-8 cfm required, which is in the range of most smaller shop compressors. At this price there is no better gun!

 

Body: forged anodized aluminum
Fluid passages:: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets
: self lubricating Teflon
Cup: polished aluminum with rotating vent hole 750cc (26 oz)
Working pressure: 13-15 psi.
Air Consumption: 8 cfm
Needle/nozzle (mm): 1.0, 1.2, 1.3, 1.4, 1,5, 1.6, 1.7.
Air caps
: 1090/1094

 

 

BEST BUY! - Comes in a hard case with gun holder, regulator, service tools, filters 4 NN setups (1.0, 1.4 1.5 & 1.7mm), 2 aircaps and mini-regulator.



   LIFETIME WARRANTY! 

#PPS/MEDSTART - add the starter kit for J100H - includes 1 medium cup and collar, 10 lids/liners, PPS adapter (available only with purchase of gun) PRICE: $55.00

 

 

 


 

Jeff,

The Jaguar sprays like a dream. After talking with you I was expecting good, but it is phenomenal.

You may recall that on my current project I'm spraying oil based BM Impervo. I used the 1.7 mm needle and the 1093 air cap. My Porter Cable side-stack portable compressor is rated at 8.3 SCFM at 40 PSIG and I cut a long section of 1/2 inch air hose down to 15 feet. I thinned with Naphtha to 50 seconds using a #4 Ford cup. It took me 10-15 minutes of practice on cardboard to get the settings dialed in. I started at 15 PSI on the regulator and the atomization was good--when I took it up to 18 (stamped on the air cap) the atomization was flawless.

As a rule, I always sand between coats, but this morning I ran my hand over the dry finish and I'm seriously contemplating not sanding. The finish is that good. The Jaguar is clearly a high-precision, high- quality piece of equipment. In the past I'd always leaned toward hand- applied finishes.That's all changed now, I know I'll be spraying a lot more in the future.

Oh, and the 3M system makes cleanup almost a joy--very easy and fast, what a great invention.

Thanks for the time you spent on the phone and for the high quality service, products and education that you provide.

Matt Doyel - Windsor CA

 

 

 

ITEM PART#

 

APPLICATION

 

DESCRIPTION

NEEDLE/NOZZLE/AIR CAP  

PRICE

   

 

   
#CP-J100H-W All woodworking stains and clears Jaguar J100H Lo-cfm gun, aluminum cup, regulator in hard case 1.0, 1.4, 1.5 & 1.7.mm with #1090 and 1094  Alum Aircap  

$382.00

Best Seller!

#CP-J100H W/PPS All woodworking stains, clears & paint Jaguar J100H Lo-cfm gun, aluminum cup, PPS medium cup, 10 lids/liners, PPS adapter & regulator in hard case 1.0, 1.4 & 1.7.mm with #1090 and 1094  Alum Aircap  

$440.00

 

 

*Other air caps available, but cfm requirements will increase. Contact us for more info.

 

  NEW    FE-Line Pressure Feed Spray Gun

The FE-Line (Finish Excellence) Spray Gun is a pressure feed gun, and similar to the Lynx, except about 2/3rds the size. This small, lightweight gun is really maneuverable and easy to spray with. Like the Lynx , it features solid, dependable construction and is made in the USA.

There are 2 models: The FE-Line Low-CFM (LCFM - 6 cfm at 15 psi required) which is used with small compressors, and the FE-Line Fine Finish (FEFF - 13cfm at 29 psi) which requires a larger compressor and uses the exclusive 12-point plenum for exceptional atomization. The gun you choose will be dictated by your compressor output. Call us for details if you are not sure. 

 

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Needle/springs: stainless steel
Air cap: anodized aluminum
Gaskets: self lubricating Teflon
Cup: from remote pressure pot
Working pressure: 15 - 29 psi. (depending on aircap used)
Air Consumption: (Low cfm) 6 cfm (with 1090 air cap), 13 cfm with 1094, 23-1313 & #23-1317 aircaps
Needle/nozzle/air caps
: 0.8, 1.0, 1.2, 1.3, 1.4, 1,5, 1.6, 1.7

 

 

 

ITEM PART#

 

APPLICATION

 

DESCRIPTION

NEEDLE/NOZZLE/AIR CAP  

PRICE

   

 

   
#CP-FELCFM All woodworking stains, clears & paint FE-Line Lo-cfm gun, no cup, hard case and tools 0.8mm, 1.3mm & 1.7mm, #1090 (6 cfm) and #1094 (13cfm) Alum Aircap  

$340.00

#CP-FEFF All woodworking stains, clears & paint FE-Line Fine Finish gun, no cup, hard case and tools 0.8mm, 1.3mm & 1.7mm, #23-1313 (13 cfm) aircap & 23-1317 Alum Aircap (13cfm)  

$385.00

#CP-FELCFM
303R2
All woodworking stains, clears & paint FE-Line Lo-cfm gun, 1 qt regulated/pressurized, hard case and tools 0.8mm, 1.3mm & 1.7mm, #1090 (6 cfm) and #1094 (10-13cfm)Alum Aircap  

$420.00

#CP-FEFF
303R2
All woodworking stains, clears & paint FE-Line Fine Finish gun, 1 qt regulated/pressurized, hard case and tools 0.8mm, 1.3mm & 1.7mm, #23-1313 (13 cfm) aircap & 23-1317 Alum Aircap (13cfm)  

$444.00

 

 CPR/HVLP SPRAY GUNS

CAT CPR/HVLP Spray Guns

CPR stands for Cat Reduced Pressure, also known as HTE (High Transfer Efficiency). This is a newer technology that incorporates the high transfer efficiency of HVLP spraying, but at a higher pressure. This results in superior atomization, however it requires a larger compressor than most low cfm HVLP spray guns. CPR uses the 12 point fine-finish plenum and come with a CPR aircap and an HVLP aircap. 

 

 

Gun Body: forged anodized aluminum
Fluid passages: stainless steel 
Air cap: anodized aluminum
Cup: from remote pressure pot
Working pressure: 29 psi.
Air Consumption: (CPR aircap) 11 cfm, (HVLP air cap) 13 cfm
Needle/nozzles included
: 0.8mm, 1.3mm, 1.7mm

 

 

Note: CPR Air Cap can be used with nozzles 0.8mm-1.7mm. The HVLP Air Cap can be used with nozzles 0.8mm-2.2mm

 

 

ITEM PART#

 

APPLICATION

 

DESCRIPTION

NEEDLE/NOZZLE/AIR CAP  

PRICE

   

 

   
 

#CPR-FE

All woodworking stains, clears & paint FE-Line Fine Finish gun, no cup, hard case and tools 0.8mm, 1.3mm & 1.7mm, #23-2101 (11 cfm CPR) aircap & 23-1301 (13 cfm HVLP) Alum Aircap  

$365.00

#CPR-FE
303R2
All woodworking stains, clears & paint FE-Line Fine Finish gun, 1 qt regulated/pressurized, hard case and tools 0.8mm, 1.3mm & 1.7mm, #23-2101 (11 cfm CPR) aircap & 23-1301 (13 cfm HVLP) Alum Aircap  

$447.00

 

 TJR DETAIL GUNS

CAT TJR Spray Guns

The TJR (Techline-Jr.) is an excellent detail gun that comes in a kit form, allowing you to spray all low-viscosity coatings and paint. All packages come with 2 cups, and different size nozzles to spray various products. This gun works fantastic with small pancake compressors.

 

Gun Body: forged anodized aluminum
Nozzle/needle: stainless steel 
Cup: aluminum and plastic 125cc (included in both sets)
Working pressure: 10 psi.
Air Consumption: 3.5 13 cfm
Needle/nozzles included
: 0.8mm 1.0mm & 1.2mm

 

 

 

 

TJR with round pattern nozzle/aircap

#TJR-Deluxe Package- kit includes 0.8mm nozzle and round aircap (see above) which is used for shading, and a 1.0mm and 1.2mm which are used for stains and low viscosity coatings. 125cc aluminum and plastic cups are included in a hard shell kit. PRICE: $188.00

 

 


#TJR-Glaze Package - kit includes 1.2mm nozzle for touch-ups and low viscosity coatings, plus the 0.5mm with round aircap for shading and precision applications. Also included is the glazing tip which allows you to lay down "pin-stripes" of glaze precisely and exactly where you want them. 125cc aluminum and plastic cups are included in a hard shell kit. PRICE: $264.00

 

 

 

 

 

 

 

TJR with glaze tip

 

 

 

ASTUROMEC HVLP Spray Guns

2 Quart Pressure Pots


T
his 2 Quart Pressure Pot is simple, versatile, and works best with 5' hoses and hung from your belt. Easy to open and clean and will hold up to daily use. Features a safety pop-off valve and is extremely lightweight.

Construction: lightweight aluminum
Regulator: single flow-through
Capacity: 64 oz. (2 quart)
Working pressure
: 50 psi.

#51-130  PRICE: $145.00
#52-132 - same as above but dual regulated PRICE: $186.00 

 
 

#51-140  Replacement Gasket: $4.50
#51-147 Replacement Check Valve: $9.50

 

The Bandit is the ultimate 2 Quart Pressure Pot, thanks to its clever band clamp cover. This design virtually eliminates stuck lids. No threads to stick or multiple lid clamps to turn.  The underside of the lid, fluid tube and fittings are 300 series stainless steel and the low, squat design prevents tip-over's. Replaceable rigid liners make for easy clean-up. 
"It's Built Like A Tank."

Construction: stainless steel wet parts 
Regulator: single flow-through (shown) or dual
Capacity: 64 oz. (2 quart)
Working pressure
: 80 psi
Gauge: 0-15psi (0-60 psi may be substituted for high viscosity products)


Other BANDIT features include:

bullet  

Wide Mouth Opening for Cleaning

bullet  

Precise Fluid Regulator with Lock

bullet  

Combination Pressure Relief/Pop-off Valve

bullet  

Solvent Resistant Padded Handle

bullet  

Comes with Rigid Liner

bullet  

Made in the USA

#51-600  2 Qt. Bandit Pot: $323.00
#51-600-2 - 2 Qt. Bandit w/ dual regulators: $343.00
#51-620-5 Replacement Gasket (pack of 5): $29.99
#51-637-12  Replacement Rigid Liners (12 pack): $33.50

 

 
 

 

 

Gun/Tank Outfits

 

 

ITEM PART#

 

APPLICATION

 

DESCRIPTION

NEEDLE/NOZZLE/AIR CAP  

PRICE

   

 

   
#CP-FELCFM
BANDIT
All woodworking stains and clears FE-Line Lo-cfm gun, 2 qt Bandit Pressure pot, dual regulators, 6 ft twin hose* hard gun case and tools 0.8mm, 1.3mm & 1.7mm, #1090 (6 cfm) and #1094 (13cfm) Alum Aircap  

$650.00

#CP-FEFF
BANDIT
All woodworking stains, clears & paint FE-Line Fine Finish gun, 2 qt Bandit Pressure pot, dual regulators, 6 ft twin hose* hard gun case and tools 0.8mm, 1.3mm & 1.7mm, #23-1313 (13 cfm) aircap & 23-1317 Alum Aircap (13cfm)  

$695.00

#CP-CSLP
BANDIT
All woodworking stains, clears & paint CSLP Fine Finish gun, 2 qt Bandit Pressure pot, dual regulators, 6 ft twin hose*  0.8mm, 1.3mm & 1.7mm, #23-1313 (13 cfm) aircap & 23-1317 Alum Aircap (13cfm)  

$799.00

* Substitute
15' twin hose for $23.00 extra
25' twin hose for $42.00 extra

 

 

 

For larger pots, visit our QualSpray lineup here
For a complete listing of hoses, filters, and other general accessories click here.

 

BACK TO TOP

Copyright 2013 Homestead Finishing Products.  All rights reserved.